News

Home > News > Content
Installation Method Of Submersible Sewage Pump
Jul 18, 2017

Sewage pump is a kind of centrifugal impurity pump, this type of self-priming non-clogging sewage pump is mainly used for conveying urban sewage, feces or liquid containing fiber, scraps and other solid particles of the medium. The pump flow channel is easy to plug, once blocked will make the pump can not work properly, or even burn the motor, resulting in poor sewage. Therefore, blocking and reliability is an important factor in the quality of sewage pump.

Fixed dry installation

The pump is mounted on the other side of the pump and is fixed to the base with the inlet pipe. Due to the water jacketed cooling system, it is possible to ensure that the pump is operating under full load conditions. Advantages: The continuous impact of water on the puddle does not damage the pump and can withstand accidental flooding. Suitable for municipal construction, overpass underground pumping station sewage discharge.

Mobile installation

Pump to support the support, then the water hose can be connected. Suitable for river management, industrial wastewater discharge, municipal sewage pump and other occasions.

QW submersible sewage pump use conditions

1, the medium temperature does not exceed 60 ℃, medium heavyness of 1 ~ 1.3kg / dm3.

2, no internal flow circulation cooling system of the pump, the motor part of the exposed surface is not more than?

3, the use of cast iron material range of PH5 ~ 9.

4,1Cr18Ni9Ti stainless steel material can use a variety of corrosive media.