News

Home > News > Content
Stainless Steel Submersible Pump Use Attention Requirements
Jun 14, 2017

Stainless steel submersible pump use Note:

The following are the same as the "

(1) stainless steel submersible pump specifications should be consistent with the actual performance of the use, should be carefully checked before use. The diameter of the outlet pipe should be matched with the diameter of the pump. Power supply capacity should be above 5.5 kVA, three-phase, 380 volts, AC 50 Hz.

The following are the same as the "

(2) stainless steel submersible pump live or pumping work, do not wash things in the vicinity, swimming or work, do not let the animals in the vicinity of the water, to prevent the pump in case of leakage, electric shock casualties. Submersible pump do not smoke large amounts of water or muddy water.

The following are the same as the "

(3) submersible pump suddenly does not turn, or suddenly a significant reduction in water and other abnormal phenomena, to be shut down inspection, be sure to cut off the power, and then removable disassembly. The pump should be equipped with a motor protection switch (factory has a placement "protection switch action current has been set up, the user may not self-action.

The following are the same as the "

(4) at any time are not allowed to pull the submersible pump cable. When using the full inspection of the cable, found damaged immediately replaced before use. The voltage fluctuation is allowed between 342 and 418 volts. Such as the use of electric distance from the power pump should be appropriate to increase the cross-sectional area of the wire.

The following are the same as the "

(5) stainless steel submersible pump leads to a ground with a ground mark of the yellow-green two-color core wire must be ground, if no fixed ground, available 2 m metal rod buried in the river, lake shore, ditch or wet Soil for the ground line.